1.1 INTRODUCTION
Selector switches are available in 2, 3, or 4-position versions, and are often used when more than one control option is needed. In general, the centre position of the selector switch is the starting cam position. Left position presses the left plunger in the selector switch. Turning the selector switch to the right presses down the right plunger. Bright LED illumination is clearly visible in daytime scenarios that feature strong sunlight as well as other low-light conditions. The easily identifiable switch positions also enable safe and intuitive operation.
1.2 USES
Indicating lights tell us what the machine is do or failing to do. When a light is connected to a machine process, and the light is on, the machine shows that it's working. These actuators are available in round or square shapes and with raised or flush designs. They also offer the option of a short or long lever. Optional illumination in red, green, blue, yellow or white is offered, and all colour variants are available with operating voltages of 24VDC to 240VAC.
Specification
Operation : Maintained (2E)
Operating Temperature (AB/AG) : -20~+55°c
Operating Humidity : 45~85%
Store Temperature : -45~+85°c
Store Humidity : Below 95%RH
Electrical Life : 100,000 (Single Contact Point) , 50,000 (Double Contact Point)
Degree of Protection
In Front Panel : IP65(IEC 60529)
Terminal : IP20(IEC60529)
Dielectric Strength
Contact Block : 2,500VAC/Minutes
Indicator Light : 2,000VAC/Minutes
Vibration Resistance
Mal-Operation : 5~55Hz single amplitude 0.5mm
Durability : 30Hz single amplitude 1.5mm
Shock Resistance
Mal-Operation : 100m/s²
Durability : 1,000m/s²
Mechanical Life
Momentary : 5,000,000 (single) , 1,000,000 (Double)
Maintained : 250,000 (Single) , 100,000 (Double)
**INCLUDE INVOICE**
HOKOMO SELECTOR SWITCH, 90° ~ 2-POSITION ~ MAINTAIN TYPE ~ 1NO, (KW1S-2E01)
- Brand: HOKOMO
- Product Code: KW1S-2E01
- Availability: In Stock
Related Products
Tags: Selector_Switch, 90°, 2_Position, Maintained, 1NO, HOKOMO