1.1 INTRODUCTION
A general-purpose push button switch doesn't have a direct opening mechanism on the NC contact. If the contact welds, conduction will be maintained and the device cannot be stopped in a hazardous situation (load). If this occurs, the device may keep operating in the hazardous state. Therefore, use the NC contact of an emergency stop push button switch for safety applications.
1.2 USES
A general-purpose push button switch is used for controls, e.g., to start machine operation or to switch modes. An emergency stop push button switch is used as a safety measure to stop hazardous parts. An Emergency Stop Switch must be highly visible in color and shape, and must be easy to operate in emergency situations. The following requirements are specified in the European Standard EN 418 (International Standard: ISO13850).
Specification
Mechanical Life : 250,000 (Contact Point)
Operating Temperature (AB/AG) : -20~+55°c
Operating Humidity : 45~85%
Store Temperature : -45~+85°c
Store Humidity : Below 95%RH
Electrical Life : 100,000 (Single Contact Point)
Degree of Protection
In Front Panel : IP65(IEC 60529)
Terminal : IP20(IEC60529)
Dielectric Strength
Contact Block : 2,500VAC/Minutes
Indicator Light : 2,000VAC/Minutes
Vibration Resistance
Mal-Operation : 10~55Hz single amplitude 0.35mm Acceleration 50m/s²
Durability : 10~55Hz single amplitude 0.35mm Acceleration 50m/s²
Shock Resistance
Mal-Operation : 150m/s²
Durability : 1,000m/s²
Action : Push to lock, Turn/ Pull to reset
Contact : NC
Color : Red
**INCLUDE INVOICE**
HOKOMO EMERGENCY STOP MUSHROOM PUSH BUTTON, 1NC ~ RED, (KW1B-V4E01R)
- Brand: HOKOMO
- Product Code: KW1B-V4E01R
- Availability: In Stock
Tags: Emergency, Stop, Mushroom, Push, Button, KW1B, HOKOMO, KW_Series