Product Description
- TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 95 A - 240 V AC 50/60 Hz coil
TeSys D
- Contactors up to 150 A for AC3 (75 kW / 400 V) and 200 A for AC1 applications
- TeSys D contactors and reversing contactors are available from 9 A to 150 A (inductive motor), and from 20 A to 200 A (resistive loads) in 3-pole and 4-pole versions.
Features
- As the best selling line of contactors in the world, TeSys D offers multi-standard solutions, high reliability with long mechanical and electrical durability for different sizes, along with the most complete accessories in the industry.
- TeSys D contactors leverage over 100 years of experience and innovation to control your motors.
Specifications
- AC & DC Coils 50/60 Hz available for whole range
- DC low consumption with direct compatibility with 100 mA I/O PLC card from 9 to 38 A
- DC low consumption with direct compatibility with 500 mA I/O PLC card from 40 to 80 A using TeSys D Green BBE 24 V electronic coil
- Various types of connection available:
- Screw clamp terminals
- Everlink (40 to 80 A)
- Spring terminals (9 to 38 A and on control terminal up to 65 A)
- Lugs terminals
- Faston terminal (9 to 12 A)
- High making and breaking capacity
- 1 NO & 1 NC integrated auxiliary contact in all 3-pole and 4-pole contactors
- Safety application with all NC auxiliary contact certified as mirror contacts for IEC 60947-4-1
- Up to 30 million mechanical operation cycles
- Electrical cycles up to 3600 cycles per hour at ambient temperature
- No derating up to 3000 m altitude
- Wide range of working temperature: -25°C to 60°C
Dimensions: 4 width sizes available to cover all ratings
- 45 mm to 38 A
- 55 mm from 40 to 65 A
- 85 mm from 80 to 95 A
- 120 mm from 115 to 150 A
- Additional auxiliary contacts: front or side mounted auxiliary contact blocks, time delay auxiliary blocks.
- Contactors combination: reversing kits, low-speed / high-speed connection kits, changeover 4-pole kits, etc.
- System assembly with other products: Power and auxiliary connection to circuit breaker and/or to overload relay.
- Dimensions: 4 width sizes available to cover all ratings
- TeSys D benefits a wide range of accessories for:
- The new TeSys D Greencontactor is equipped with an innovative electronic coil requiring up to 80% less energy (when sealed) than electro-mechanical contactors.
- TeSys D Green contactors simplify your maintenance services with 90% less references needed.TeSys D Green contactors, associated with TeSys LR9D electronic overload relays, reduce heat generation and energy consumption by up to 50%.
Benefits
- TeSys D contactors can offer quick simple setup, while maintaining a compact size. These contactors can provide multiple advantages, including:
Safety
- Safe and long-lasting power connection with Everlink and spring terminals
- Suitable for safety applications thanks to mechanically linked contacts and mirror contacts (certified by IEC 60947-4-1 and 60947-5-1)
- Identification of safety chain with red cover and auxiliary contact
Efficiency
- Recognized high performance and quality solutions
- Outstanding breaking/making capacity up to 20 In
- Multistandard: IEC, UL, CCC, EAC, various Marine standards, etc.
- PLC direct connection
Continuity of Service
- Certified type 1 and 2 coordination tables
- Worldwide availability of products and after-sales services
Application
- TeSys D contactors are primarily used in industry, infrastructure and building applications.
- TeSys D contactors have been designed for perfect integration in control systems, specific references BL or BBE compatible with digital PLC I/O 100 mA or 500 mA
- These contactors can be used to create motor starters for any type of application
Download
| Environment | |
| Ambient air temperature for operation | -5...60 °C |
| Ambient air temperature for storage | -60...80 °C |
| Depth | 130 mm |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 |
| Height | 127 mm |
| IP degree of protection | IP20 front face conforming to IEC 60529 |
| Mechanical robustness | Vibrations contactor open 2 Gn, 5...300 Hz Shocks contactor open 8 Gn for 11 ms Vibrations contactor closed 3 Gn, 5...300 Hz Shocks contactor closed 10 Gn for 11 ms |
| Operating altitude | 3000 m without derating in temperature |
| Permissible ambient air temperature around the devicE | -40...70 °C at Uc |
| Pollution Degree | 3 |
| Product weight | 1.61 kg |
| Protective treatment | TH conforming to IEC 60068-2-30 |
| Width | 85 mm |
| Main | |
| Associated fuse rating | 160 A gG at <= 690 V coordination type 2 for power circuit 200 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 |
| Auxiliary contact composition | 1 NO + 1 NC |
| Average impedance | 0.8 mOhm at 50 Hz - Ith 125 A for power circuit |
| Connections - terminals | Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: flexible - without cable end Power circuit : connector 2 cable(s) 4...25 mm² - cable stiffness: flexible - without cable end Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: flexible - with cable end Power circuit : connector 2 cable(s) 4...16 mm² - cable stiffness: flexible - with cable end Power circuit : connector 1 cable(s) 4...50 mm² - cable stiffness: solid - without cable end Power circuit : connector 2 cable(s) 4...25 mm² - cable stiffness: solid - without cable end |
| Contactor application | Motor control Resistive load |
| Control circuit type | AC 50/60 Hz |
| Device short name | LC1D |
| Electrical durability | 1.2 Mcycles 95 A AC-3 at Ue <= 440 V 1.3 Mcycles 125 A AC-1 at Ue <= 440 V |
| lrms rated making capacity | 1100 A at 440 V for power circuit conforming to IEC 60947 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 |
| Mechanical durability | 4 Mcycles |
| Motor power HP (UL / CSA) | 20 hp at 200/208 V AC 50/60 Hz for 3 phases motors 7.5 hp at 115 V AC 50/60 Hz for 1 phase motors 15 hp at 230/240 V AC 50/60 Hz for 1 phase motors 25 hp at 230/240 V AC 50/60 Hz for 3 phases motors 60 hp at 460/480 V AC 50/60 Hz for 3 phases motors 60 hp at 575/600 V AC 50/60 Hz for 3 phases motors |
| Motor power kW | 45 kW at 660...690 V AC 50/60 Hz AC-3 45 kW at 415...440 V AC 50/60 Hz AC-3 55 kW at 500 V AC 50/60 Hz AC-3 45 kW at 1000 V AC 50/60 Hz AC-3 15 kW at 400 V AC 50/60 Hz AC-4 25 kW at 220...230 V AC 50/60 Hz AC-3 45 kW at 380...400 V AC 50/60 Hz AC-3 |
| Operating rate | 3600 cyc/h at <= 60 °C |
| Operating time | 20...35 ms closing 6...20 ms opening |
| Overvoltage category | III |
| Poles description | 3P |
| Power dissipation per pole | 7.2 W AC-3 12.5 W AC-1 |
| Power pole contact composition | 3 NO |
| Product certifications | BV CCC DNV GL GOST LROS (Lloyds register of shipping) RINA |
| Product name | TeSys D |
| Product or component type | Contactor |
| Range | TeSys |
| Rated breaking capacity | 1100 A at 440 V for power circuit conforming to IEC 60947 |
| Safety cover | With |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
| Tightening torque | Power circuit : 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm Power circuit : 9 N.m - on connector hexagonal 4 mm Control circuit : 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit : 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2 |
| Utilisation category | AC-1 AC-3 AC-4 |
| [Icw] rated short-time withstand current | 1100 A <= 40 °C 1 s power circuit 135 A <= 40 °C 10 min power circuit 400 A <= 40 °C 1 min power circuit 800 A <= 40 °C 10 s power circuit 100 A 1 s signalling circuit 120 A 500 ms signalling circuit 140 A 100 ms signalling circuit |
| [Ie] rated operational current | 125 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit 95 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit |
| [Ith] conventional free air thermal current | 125 A at <= 60 °C for power circuit 10 A at <= 60 °C for signalling circuit |
| [Uc] control circuit voltage | 240 V AC 50/60 Hz |
| [Ue] rated operational voltage | <= 300 V DC 25...400 Hz for power circuit <= 1000 V AC for power circuit |
| [Uimp] rated impulse withstand voltage | Conforming to IEC 60947 |
| [Ui] rated insulation voltage | 1000 V for power circuit conforming to IEC 60947-4-1 600 V for power circuit certifications CSA 600 V for power circuit certifications UL 690 V for signalling circuit conforming to IEC 60947-1 600 V for signalling circuit certifications CSA 600 V for signalling circuit certifications UL |
| Complementary | |
| Auxiliary contacts type | Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 Type mirror contact (1 NC) conforming to IEC 60947-4-1 |
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | 0.85...1.1 Uc operational at 55 °C, AC 60 Hz 0.3...0.6 Uc drop-out at 55 °C, AC 50/60 Hz 0.8...1.1 Uc operational at 55 °C, AC 50 Hz |
| Heat dissipation | 6...10 W at 50/60 Hz |
| Hold-in power consumption in VA | 26 VA at 20 °C (cos ϕ 0.3) 60 Hz 26 VA at 20 °C (cos ϕ 0.3) 50 Hz |
| Inrush power in VA | 245 VA at 20 °C (cos ϕ 0.75) 60 Hz 245 VA at 20 °C (cos ϕ 0.75) 50 Hz |
| Insulation resistance | > 10 MOhm for signalling circuit |
| Minimum switching current | 5 mA for signalling circuit |
| Minimum switching voltage | 17 V for signalling circuit |
| Mounting support | Plate Rail |
| Non-overlap time | 1.5 ms on de-energisation (between NC and NO contact) 1.5 ms on energisation (between NC and NO contact) |
| Signalling circuit frequency | 25...400 Hz |
| Warranty | |
| Warranty period | 18 months |
SCHNEIDER CONTACTOR (D TYPE), 25 / 45KW ~ 95A ~ 1NO + 1NC ~ 220VAC, (LC1D95U7)
- Brand: Schneider
- Product Code: LC1D95U7
- Availability: In Stock